Standard Fixed Uprights

Adjustable Uprights

  • Easy to setup, accurate and rapid height adjustments.
  • Quickly adjust to any height within the specific model range.
  • All adjustable uprights use a 2” O.D. pin.
  • No knobs or wing nuts to adjust.
  • All tube surfaces have protective anodized coating.
  • Slots are located 3/8” from the top, leaving a solid ring for added strength.
  • Additional sets of four slots are available at custom locations for an additional cost.
  • Special order black coating available.
  • Custom heights available.
  • No tools required for setup or disassembly.
  • Intended for indoor use only.

Call or Contact Us For A Quote

Pipe & Base Quote Request

Adjustable Uprights

1 ½” OD Standard Uprights
2 Piece Adjustable Uprights
  Part Number   Size   Recommended Base Size   Unit Price
  TS35   3’ – 5’   B1416 (12 LBS)   $63.80
  TS47   4’ – 7’   B1416 (12 LBS)   $71.20
  TS58   5’ – 8’   B1416 (12 LBS)   $75.20
  TS610   6’ – 10’   B1818 (17.5 LBS)   $82.80
  TS712   7’ – 12’   B1818 (17.5 LBS)   $90.40
  TS814   8’ – 14’   B181838 (35 LBS)   $98.10
  TS916   9’ – 16’   B181838 (35 LBS)   $105.80
  TS1018   10’ – 18’   B2424 (31 LBS)   $113.90
  TS1120   11’ – 20’   B242428 (62 LBS)   $121.70
  TS1222   12’ – 22’   B242438 (62 LBS)   $129.90
  TS1324   13’ – 24’   B242438 (62 LBS)   $137.60
  TS1426   14’ – 26’   B242438 (62 LBS)   $145.40
  SLOTS   4 Slots   Additional set of 4 Slots   $25.00
3 Piece Adjustable Uprights
  Part Number   Size   Recommended Base Size   Unit Price
  TS511   5’ – 11’   B1818 (17.5 LBS)   $142.30
  TS614   6’ – 14’   B181838 (35 LBS)   $154.10
  TS717   7’ – 17’   B181838 (35 LBS)   $166.60
  TS820   8’ – 20’   B242438 (62 LBS)   $179.00
  TS923   9’ – 23’   B242438 (62 LBS)   $191.00
  SLOTS   4 Slots   Additional set of 4 Slots   $25.00

Note: All adjustable uprights require a 2” Diameter Pin for the base assembly. The minimum set height (when assembled on the base) will vary depending on your pin length. Check with a sales representative for exact dimensions if needed.